Відео

Wow even that much! Thanks for your feedback.

😉 💪

Good question. What I read on the FAQ’s is this: you can use the internal sensor to control the temperature and the external sensor to do the floor overheating protection(optional). Or you can use the external sensor to control the temperature, at which point it will no longer be used for floor overheat protection detection. This sensor option function is supported by Meross app.

This one is for Apple Carplay but they have Android Auto solutions as well.

Not sure but you can also crop the video 😉 I do this when making nice footage but in case of accidents it is very useful to have the timestamp.

🙏

You do not want to go the camera in parking serveillance mode? If it is hard wired it will unless you turn the serveillance mode off in the settings.

Hi! Parking surveillance records both but it is only event triggerd. Timelapse will record continuously but only the front 😉

Hi! On the dashcam itself not but in the 70mai app you can. Just connect to your dashcam by turning the hotspot on 😉

@@LaPalmeraie0032 ok,thanks

My pleasure😉

Wait... You were able to change from halogen to LED?

@HerrKatzen hi! No no, I state in the video as well that these are the original light units. It’s impossible the change halogen units to LED because not only the connections are different, the leveling is also done by the board computer where for the halogen it is done by the turn button on the dashboard and the screws under the bonnet on each unit 😉

Hi! Thank you so much. I will make this video for you asap. No problem 😉

There you go 😉 ua-cam.com/video/Vf60JPP3N7o/v-deo.htmlsi=jGdmnj0r_ltzUZEb

Shukran! 🙏 check your settings if Android Auto is set to « always ». Not sure if this is on the car or the phone so check both 😉

Hi! Make the difference between open & closed (like when going through the doorway) and locked & unlocked like when leaving home. The Nuki can lock and unlock the door but isn’t aware of the position of the door. This means that you can open your door but still will be able to lock it. With the door sensor you will know if the door is closed as well and the Nuki will lock when the door is closed. In the app you can see all these statuses. The « open door » feature is something else. This will unlock your door but hold the key for a moment so the door pops open. I made a dedicated video on this subject 😉

@@LaPalmeraie0032 Thanks, can you pls share the dedicated video link?

ua-cam.com/video/N-toXeg8aqw/v-deo.htmlsi=3sYocgKeOR0asjoF

C’est le Trachycarpus fortunei ‘Tesan North’ 😉

Non car ça serait embêtant si la porte se verrouille tout le temps dès que la porte est fermée mais pour cet effet il y le « lock and go » où on appuie deux fois sur le Nuki et qu’il verrouille la porte dès qu’elle est fermée soit à l’aide du « geofencing » où la porte se verrouille dès que vous vous éloignez de la maison (et vice versa).

Merci pour ta réponse ! Je m'interrogeais sur cette possibilité dans le cadre de la location saisonnière de manière à ce que lorsque les clients quittent l'appartement celui-ci puisse se verrouiller sans manœuvre manuelle de leur part et éviter les oublis. Connaîtrais tu des solutions ? @@LaPalmeraie0032

@stephdreams4495 dans l’application il y l’option « timer » où on peut configurer des actions par rapport à une journée et/heure précise. 😉

It stays on in my car, except when the voltage drops under 11.8V I think. Are you sure you’re using a continuous power source? Does the battery has enough charge?

🙏

Привет! Здесь часть 1 ua-cam.com/video/qDQgJRec6Ak/v-deo.htmlsi=GNBSDsfOyaRVPrQX и часть 2 ua-cam.com/video/f4FhKRsiDa4/v-deo.htmlsi=8FWHwhHNR-VfcWsa

Thank you so much. It is although it’s in the town center! It’s still early in the season so stay tuned for the updates when there’s more color, more volume etc 😉

Hi, I’m not sure what you mean by lock the video. Where did you saw this in the video/app. I guess it’s a function the protect the existing (full) clip from being over written.

The dashcams uses 2A as input but a bit higher would be good. I used 10A for both my switched as continuous wire. 😉

Do you have a SD card slot on your radio?

Yes I do , do you think its working ?

@marius-bogdanbizon6957 no, you need wired carplay from factory. Yours doesn’t have this. Your only solution is an aftermarket one.

My pleasure. 🙏

Yes of course. Please see the footage 😉

It needs to detect the 4 corners in order to show the correct colors according to the displayed image. When wrapping around the strip a second time you won’t be able to indicate the corners correctly and the shown colors would be a mess. The brightness would be another thing. I had to trim a bit of the strip and still a never use more than 50% brightness. The 4D works with the lines and shapes so I guess that it should work with only the control box and camera but you won’t be able to calibrate the corners.

Hi! Yes of course. Or just with the Nanoleaf app or with other Matter compatible ecosystems. 😉

Hallo! De power socket is de sigarettenaansteker onder de airco unit. De cig_lighter is diegene in de armsteun (omgekeerd zou logischer zijn natuurlijk). Wel opvallend dat beide niet meer werken aangezien ze apart afgezekerd zijn. Even beide zekeringen checken dus; De cig_lighter zit op nummer 15, de derde van rechts boven aan. Bij de Qashqai’s van na 2017 (met de rechthoekige mistlampen) zit rechts ernaast op nummer 16 dus de power socket. Op de eerdere modellen (met ronde mistlampen) zit deze eronder op poort 32. Indien ze allebei zijn doorgebrand best even nagaan of er geen 12v apparaat werd ingeplugd dat kortsluiting veroorzaakt.

Can you create a pin from remote for somebody else?

No, not at all.

Yes of course.

You should use a fuse that is free or not critical in the first place and that can have one more device added up to it as well. Which fuse that is, depends on your car of course. A min 10A fuse would be best.

¡Hola! ¿No, nunca? Utilicé varias cámaras de tablero y diferentes tarjetas SD y nunca tuve problemas, excepto una vez que la tarjeta no fue reconocida. Esto se resolvió formateando la tarjeta.

Hi! No the 1.3 doesn’t have the cover. 😉

Thanks because I Bought just week ago and thinking that dealer scam me give me without . Really appreciate

De quelle espèce s’agit-il et quelle taille a-t-il ?

@@LaPalmeraie0032 merci pour ta réponse c’est un Washintonia filifera il est planté depuis un an et il fait environ 2 mètres. Merci

@1010RamSes d’accord. Combien il a fait au minimum cet hiver chez vous et est-ce que vous l’avez protégé (et si oui comment)? Question d’être sûr qu’il s’agit d’un filifera… vous pouvez m’envoyer une photo? Le filifera est plutôt rare 😉

@@LaPalmeraie0032 oui je te comprend, c’est bien un filifera, il y’a une différence avec un robusta. Il n’a pas fait très froid, -7, mais on l’a protégé tous l’hiver de novembre à mars, et je pense que c’est ça l’erreur, lorsque j’ai enlevé le voile, il y’avait de la pourriture sur la lance. Comme de la poussière, et la lance du milieu avait un peu de vert à la base mais sinon toute cramé. Pour voir si il était mort j’ai fait un trait sur les deux lances et les traits ce sont décalé donc une croissance. Mais il y’a 3 jours la lance est venu dans ma main. Voilà tu sais tout. Merci

@@LaPalmeraie0032 je ne peux pas t’envoyer de photo sur les commentaires UA-cam

It absolutely is! 💯

🤔 he will do it exact the same way… you not seeing it being wired doesn’t means it will be done better or different. You do not damage anything. It’s is made for being openend for repairs etc 😉

Nice! You will love it 😉

😂 Hai visto anche gli altri video in cui li metto via sopra le luci posteriori?

Not sure which sat nav you have? The original Connect system? This is the same in the Qashqai and Xtrail.

@@LaPalmeraie0032 yes original 2015 model

Normally the Qashqai/Xtrail had the Connect system with SD card slot up to 2017. So it should be compatible I guess.

www.winparts.be/verlichting-lampen/koplamp/nissan/qashqai-ii-suv-j11-j11-bouwjaar-2013-11-heden/c28-519-32998/koplamp-set/p1500271.html but why you would want this?

Ooh u bent van belgie. Ik zelf ben van nederland. Heb zelf ook een NTEC. Heb alleen een barst in het glas wil hem daarom vervangen. De link die u heeft gedeeld lijkt mij geen led verlichting

Inderdaad. In de link staan onderaan wel artikelnummers en daarmee kun je verder zoeken. Je kunt de vraag anders ook eens stellen op het Qashqai-Passion.nl forum. Nissanwielmonteur kan je dan met zekerheid het juiste nummer geven.

Man don’t say that I just bought this car

It’s a great car and all these little mods just make it only more enjoyable 😉

Goeie vraag 😉 normaal lang genoeg om de kabel deftig weg te werken. Ik schat een meter of 3?

Hi! No with this one there are no such problems. In my experience at least 😉 the only problem I had is that I had to replug it almost every time when I started the car is the satnav system did not see the dongle. But that’s more a problem in my car than it is for this solution.

Thank you for your kind answer!!! I will try this item Have a nice day😆😆

It comes with it’s own chain. i also replaced the original chain to solve this kind of problem. 😉

💪

Hi! Thank you! 🙏 the hub normally communicates through 2.4Ghz WiFi so if it is in WiFi range it should be ok 😉 and yes you could control it anytime and everywhere, even when not at home. But even better, you can set up automation and never be bothered about them again. 😇

@@LaPalmeraie0032 thanks for the prompt reply! How’s the solar powered battery holding up? Does it need to be charged manually as well.

@fakhruziefransyah9796 with pleasure 😉 the solar panel holds up great! Since the installation I didn’t had much sun and used the shade daily. When I last checked it had gained some % so it works perfect for me. I thinking about purchasing them as well for my other shade solution that I show in a more recent video. However, the Soma Smart is nicer imho. 😉